First, accurately measure equal amounts of Component "A" and Component "B."
with a mortar knife evenly mixed “A” component and “B” component, scrape up the mixed adhesive, so that it is in the middle of the mixing board to form a small heap, and then the heap is divided into four equal parts, and then the corresponding portions of the further mixing, mixing the adhesive should be completely uniform in concentration and appearance. Appearance is completely uniform.
Use a specific type of adhesive within the specified working time (that is, effective time). For example: slow drying - 25 degrees Celsius in 45 minutes. Medium dry - 25 degrees Celsius in 30 minutes. Fast drying - use within 5 minutes at 25 degrees Celsius. If you do not use the adhesive within this time will lead to adhesive and strength decline, so that can not be used.
the bonding surface should be dry and dust-free, and fully wiped glue.
in case of tile, rock plate, terra cotta plate, dry hanging and bonding construction, please do the substrate bonding surface rough sanding treatment, and then do the compatibility test.
After Construction Of Each Can, Please Use Special Cleaning Agent To Clean The Thread Part Of The Glue Gun. After Each Continuous Construction, Please Use Special Cleaning Agent To Clean The Whole Glue Gun Tube So As To Avoid Blockage
Note The Speed Of The Injection, Usually The Amount Of Injection To The Required Filling Volume Can Be Half. Fill Vertical Gaps From The Bottom To The Top; Fill Gaps Such As The Ceiling, Due To Gravity, Uncured Foam May Fall, It Is Recommended That Just After The Filling Of The Appropriate Support, After The Foam Is Cured And Bonded To The Seam Wall, The Support Can Be Removed. About 10 Minutes, Foam Debonding, After 60 Minutes Can Be Cut. Cut Off Excess Foam With A Knife, Then Apply Cement Mortar, Paint Or Silica Gel To The Surface.
Repair And Cutting After The Foam Fully Cured Molding, It Is Worth Noting That The Removal Of The Foam Skin Will Reduce The Strength Of The Foam And Reduce The Sealing And Waterproof Effect Of The Foam
